Remove old pipewire and wireplumber ebuilds

2023-05-27 01:55:09 +01:00 · 2023-05-27 01:55:09 +01:00 · fd1f02c17e
commit fd1f02c17e
parent 80e14ee793
22 changed files with 0 additions and 1512 deletions
--- a/media-video/pipewire/Manifest
+++ b/media-video/pipewire/Manifest
@ -1 +0,0 @@
 DIST pipewire-0.3.51.tar.gz 1789070 BLAKE2B 8538eb9f2178efa26365f30b324b707826e580caa1fd9c09b62c561c140c14186e0d2b04808fa78eb5642ddccf1a347def19934ecd654be06b215a693075b6fc SHA512 a762fd260b4b14ad9ef142be11ab1c22268da6726e2179559ffb254f0ce7daf7a502779e33c64313a9c6a9fc1bd15150b76be04ec81aa27c35dbb4333cecdb4a
--- a/media-video/pipewire/files/99-pipewire-default-hook.conf
+++ b/media-video/pipewire/files/99-pipewire-default-hook.conf
@ -1,17 +0,0 @@
 # Load pipewire configuration at conf hook processing time. This allows to
 # override pulseaudio defaults configuration which is also applied via hook.
 #
 # Note since hooks are run after @GENTOO_PORTAGE_EPREFIX@/etc/asound.conf and ~/.asoundrc are applied,
 # we load these again here make sure that user configuration takes precedence.
@hooks [
 	{
 		func load
 		files [
 			"@GENTOO_PORTAGE_EPREFIX@/usr/share/alsa/alsa.conf.d/99-pipewire-default.conf"
 			"@GENTOO_PORTAGE_EPREFIX@/etc/asound.conf"
 			"~/.asoundrc"
 		]
 		errors false
 	}
 ]
--- a/media-video/pipewire/files/gentoo-pipewire-launcher.in
+++ b/media-video/pipewire/files/gentoo-pipewire-launcher.in
@ -1,29 +0,0 @@
 #!/bin/sh
 # PipeWire launcher script for XDG compliant desktops on OpenRC.
 #
 # systemd users are very _STRONGLY_ advised to use the much
 # more reliable and predictable user units instead.
 # WARNING: This script assumes being run inside XDG compliant session,
 # which means D-Bus session instance is expected to be correctly set up
 # prior to this script starting. If that is not true, things may break!
 # Best to reap any existing daemons and only then try to start a new set.
 pkill -u "${USER}" -x pipewire\|wireplumber 1>/dev/null 2>&1
 # The core daemon which by itself does probably nothing.
@GENTOO_PORTAGE_EPREFIX@/usr/bin/pipewire &
 # The so called pipewire-pulse daemon used for PulseAudio compatibility.
 # Commenting this out will stop the PA proxying daemon from starting,
 # however ALSA (with pipewire-alsa), JACK (with jack-sdk) and PW API using
 # clients will still have access to audio and may end up clashing with
 # non-PW apps over HW control (most notably, /usr/bin/pulseaudio daemon).
@GENTOO_PORTAGE_EPREFIX@/usr/bin/pipewire -c pipewire-pulse.conf &
 # Hack for bug #822498
 sleep 1
 # Finally a session manager is required for PipeWire to do anything.
 exec @GENTOO_PORTAGE_EPREFIX@/usr/bin/wireplumber
--- a/media-video/pipewire/files/pipewire-0.3.25-enable-failed-mlock-warning.patch
+++ b/media-video/pipewire/files/pipewire-0.3.25-enable-failed-mlock-warning.patch
@ -1,12 +0,0 @@
 diff --git a/src/daemon/pipewire.conf.in b/src/daemon/pipewire.conf.in
 --- a/src/daemon/pipewire.conf.in
 +++ b/src/daemon/pipewire.conf.in
@@ -6,7 +6,7 @@ context.properties = {
     #support.dbus                          = true
     #link.max-buffers                      = 64
     link.max-buffers                       = 16                       # version < 3 clients can't handle more
 -    #mem.warn-mlock                        = false
 +    mem.warn-mlock                         = true                     # Gentoo should have good RLIMITs now
     #mem.allow-mlock                       = true
     #mem.mlock-all                         = false
     #clock.power-of-two-quantum            = true
--- a/media-video/pipewire/files/pipewire-0.3.56-big-endian.patch
+++ b/media-video/pipewire/files/pipewire-0.3.56-big-endian.patch
@ -1,55 +0,0 @@
 https://gitlab.freedesktop.org/pipewire/pipewire/-/commit/aaa015d0c0c66b64c7198a34ad3c4b43445667d2
 https://gitlab.freedesktop.org/pipewire/pipewire/-/commit/1a5ec4452fa21592eaeeb823ad95a1db6eb60376
 https://gitlab.freedesktop.org/pipewire/pipewire/-/commit/f857fd46262b1a90ad94f86e34216a1a886d9463
 From aaa015d0c0c66b64c7198a34ad3c4b43445667d2 Mon Sep 17 00:00:00 2001
 From: Wim Taymans <wtaymans@redhat.com>
 Date: Tue, 19 Jul 2022 13:06:52 +0200
 Subject: [PATCH] avb: fix compilation on big endian
 --- a/spa/plugins/avb/avbtp/packets.h
 +++ b/spa/plugins/avb/avbtp/packets.h
@@ -116,7 +116,7 @@ struct spa_avbtp_packet_aaf {
 	unsigned gv:1;
 	unsigned tv:1;
 -	uint8_t seq_number;
 +	uint8_t seq_num;
 	unsigned _r2:7;
 	unsigned tu:1;
 GitLab
 From 1a5ec4452fa21592eaeeb823ad95a1db6eb60376 Mon Sep 17 00:00:00 2001
 From: Wim Taymans <wtaymans@redhat.com>
 Date: Tue, 19 Jul 2022 13:49:42 +0200
 Subject: [PATCH] avb: fix compilation on big endian
 --- a/src/modules/module-avb/aaf.h
 +++ b/src/modules/module-avb/aaf.h
@@ -35,7 +35,7 @@ struct avb_packet_aaf {
 	unsigned gv:1;
 	unsigned tv:1;
 -	uint8_t seq_number;
 +	uint8_t seq_num;
 	unsigned _r2:7;
 	unsigned tu:1;
 GitLab
 From f857fd46262b1a90ad94f86e34216a1a886d9463 Mon Sep 17 00:00:00 2001
 From: Wim Taymans <wtaymans@redhat.com>
 Date: Tue, 19 Jul 2022 14:07:16 +0200
 Subject: [PATCH] avb: fix compilation on big endian
 --- a/src/modules/module-avb/iec61883.h
 +++ b/src/modules/module-avb/iec61883.h
@@ -37,7 +37,7 @@ struct avb_packet_iec61883 {
 	unsigned gv:1;
 	unsigned tv:1;
 -	uint8_t seq_number;
 +	uint8_t seq_num;
 	unsigned _r2:7;
 	unsigned tu:1;
 GitLab
--- a/media-video/pipewire/files/pipewire-0.3.59-filter-chain-alloc-port-data-handle.patch
+++ b/media-video/pipewire/files/pipewire-0.3.59-filter-chain-alloc-port-data-handle.patch
@ -1,87 +0,0 @@
 https://gitlab.freedesktop.org/pipewire/pipewire/-/commit/94a857550b566472e5ab51191e1b34098e5a9506
 From 94a857550b566472e5ab51191e1b34098e5a9506 Mon Sep 17 00:00:00 2001
 From: Wim Taymans <wtaymans@redhat.com>
 Date: Mon, 3 Oct 2022 09:44:32 +0200
 Subject: [PATCH] filter-chain: alloc port data per handle.
 --- a/src/modules/module-filter-chain.c
 +++ b/src/modules/module-filter-chain.c
@@ -1501,7 +1501,6 @@ static int load_node(struct graph *graph, struct spa_json *json)
 	bool have_config = false;
 	uint32_t i;
 	int res;
 -	float *data;
 	while (spa_json_get_string(json, key, sizeof(key)) > 0) {
 		if (spa_streq("type", key)) {
@@ -1576,14 +1575,6 @@ static int load_node(struct graph *graph, struct spa_json *json)
 		port->idx = i;
 		port->external = SPA_ID_INVALID;
 		port->p = desc->output[i];
 -		if ((data = port->audio_data[i]) == NULL) {
 -			data = calloc(1, MAX_SAMPLES * sizeof(float));
 -			if (data == NULL) {
 -				pw_log_error("cannot create port data: %m");
 -				return -errno;
 -			}
 -		}
 -		port->audio_data[i] = data;
 		spa_list_init(&port->link_list);
 	}
 	for (i = 0; i < desc->n_control; i++) {
@@ -1629,6 +1620,26 @@ static void node_cleanup(struct node *node)
 	}
 }
 +static int port_ensure_data(struct port *port, uint32_t i)
 +{
 +	float *data;
 +	if ((data = port->audio_data[i]) == NULL) {
 +		data = calloc(1, MAX_SAMPLES * sizeof(float));
 +		if (data == NULL) {
 +			pw_log_error("cannot create port data: %m");
 +			return -errno;
 +		}
 +	}
 +	port->audio_data[i] = data;
 +	return 0;
 +}
 +
 +static void port_free_data(struct port *port, uint32_t i)
 +{
 +	free(port->audio_data[i]);
 +	port->audio_data[i] = NULL;
 +}
 +
 static void node_free(struct node *node)
 {
 	uint32_t i, j;
@@ -1636,7 +1647,7 @@ static void node_free(struct node *node)
 	spa_list_remove(&node->link);
 	for (i = 0; i < node->n_hndl; i++) {
 		for (j = 0; j < node->desc->n_output; j++)
 -			free(node->output_port[j].audio_data[i]);
 +			port_free_data(&node->output_port[j], i);
 	}
 	node_cleanup(node);
 	descriptor_unref(node->desc);
@@ -1688,6 +1699,8 @@ static int graph_instantiate(struct graph *graph)
 				spa_list_for_each(link, &port->link_list, input_link) {
 					struct port *peer = link->output;
 +					if ((res = port_ensure_data(peer, i)) < 0)
 +						goto error;
 					pw_log_info("connect input port %s[%d]:%s %p",
 							node->name, i, d->ports[port->p].name,
 							peer->audio_data[i]);
@@ -1696,6 +1709,8 @@ static int graph_instantiate(struct graph *graph)
 			}
 			for (j = 0; j < desc->n_output; j++) {
 				port = &node->output_port[j];
 +				if ((res = port_ensure_data(port, i)) < 0)
 +					goto error;
 				pw_log_info("connect output port %s[%d]:%s %p",
 						node->name, i, d->ports[port->p].name,
 						port->audio_data[i]);
 GitLab
--- a/media-video/pipewire/files/pipewire.desktop
+++ b/media-video/pipewire/files/pipewire.desktop
@ -1,12 +0,0 @@
 [Desktop Entry]
 Version=1.0
 Name[de]=PipeWire Mediensystem
 Name=PipeWire Media System
 Comment[de]=Das PipeWire Mediensystem starten
 Comment=Start the PipeWire Media System
 Exec=/usr/libexec/pipewire-launcher
 Terminal=false
 Type=Application
 X-GNOME-HiddenUnderSystemd=true
 X-KDE-HiddenUnderSystemd=true
 X-systemd-skip=true
--- a/media-video/pipewire/files/pipewire.desktop-r1
+++ b/media-video/pipewire/files/pipewire.desktop-r1
@ -1,12 +0,0 @@
 [Desktop Entry]
 Version=1.0
 Name[de]=PipeWire Mediensystem
 Name=PipeWire Media System
 Comment[de]=Das PipeWire Mediensystem starten
 Comment=Start the PipeWire Media System
 Exec=/usr/bin/gentoo-pipewire-launcher
 Terminal=false
 Type=Application
 X-GNOME-HiddenUnderSystemd=true
 X-KDE-HiddenUnderSystemd=true
 X-systemd-skip=true
--- a/media-video/pipewire/metadata.xml
+++ b/media-video/pipewire/metadata.xml
@ -1,30 +0,0 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
 <pkgmetadata>
 	<maintainer type="project">
 		<email>gnome@gentoo.org</email>
 		<name>Gentoo GNOME Desktop</name>
 	</maintainer>
 	<maintainer type="person">
 		<email>sam@gentoo.org</email>
 		<name>Sam James</name>
 	</maintainer>
 	<upstream>
 		<bugs-to>https://gitlab.freedesktop.org/pipewire/pipewire/-/issues</bugs-to>
 		<changelog>https://gitlab.freedesktop.org/pipewire/pipewire/-/releases</changelog>
 		<doc>https://gitlab.freedesktop.org/pipewire/pipewire/-/wikis/home</doc>
 	</upstream>
 	<use>
 		<flag name="echo-cancel">Enable WebRTC-based echo canceller via <pkg>media-libs/webrtc-audio-processing</pkg></flag>
 		<flag name="extra">Build pw-cat/pw-play/pw-record</flag>
 		<flag name="flatpak">Enable Flatpak support</flag>
 		<flag name="jack-client">Install a plugin for running PipeWire as a JACK client</flag>
 		<flag name="jack-sdk">Use PipeWire as JACK replacement</flag>
 		<flag name="lv2">Allow loading LV2 plugins via <pkg>media-libs/lv2</pkg></flag>
 		<flag name="pipewire-alsa">Replace PulseAudio's ALSA plugin with PipeWire's plugin</flag>
 		<flag name="ssl">Enable raop-sink support (needs <pkg>dev-libs/openssl</pkg>)</flag>
 		<flag name="system-service">Install systemd unit files for running as a system service. Not recommended.</flag>
 		<flag name="X">Enable audible bell for X11</flag>
 		<flag name="sound-server">Provide sound server using ALSA and bluetooth devices</flag>
 	</use>
 </pkgmetadata>
--- a/media-video/pipewire/pipewire-0.3.51-r2.ebuild
+++ b/media-video/pipewire/pipewire-0.3.51-r2.ebuild
@ -1,363 +0,0 @@
 # Copyright 1999-2022 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 EAPI=8
 PYTHON_COMPAT=( python3_{8..10} )
 inherit flag-o-matic meson-multilib optfeature prefix python-any-r1 systemd udev
 if [[ ${PV} == 9999 ]]; then
 	EGIT_REPO_URI="https://gitlab.freedesktop.org/${PN}/${PN}.git"
 	inherit git-r3
 else
 	if [[ ${PV} == *_p* ]] ; then
 		MY_COMMIT=""
 		SRC_URI="https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/${MY_COMMIT}/pipewire-${MY_COMMIT}.tar.bz2 -> ${P}.tar.bz2"
 		S="${WORKDIR}"/${PN}-${MY_COMMIT}
 	else
 		SRC_URI="https://gitlab.freedesktop.org/${PN}/${PN}/-/archive/${PV}/${P}.tar.gz"
 	fi
 	KEYWORDS="amd64 arm arm64 ~loong ppc ppc64 ~riscv ~sparc x86"
 fi
 DESCRIPTION="Multimedia processing graphs"
 HOMEPAGE="https://pipewire.org/"
 LICENSE="MIT LGPL-2.1+ GPL-2"
 # ABI was broken in 0.3.42 for https://gitlab.freedesktop.org/pipewire/wireplumber/-/issues/49
 SLOT="0/0.4"
 IUSE="bluetooth doc echo-cancel extra gstreamer jack-client jack-sdk lv2 pipewire-alsa ssl system-service systemd test udev v4l X zeroconf"
 # Once replacing system JACK libraries is possible, it's likely that
 # jack-client IUSE will need blocking to avoid users accidentally
 # configuring their systems to send PW sink output to the emulated
 # JACK's sink - doing so is likely to yield no audio, cause a CPU
 # cycles consuming loop (and may even cause GUI crashes)!
 REQUIRED_USE="
 	jack-sdk? ( !jack-client )
 	system-service? ( systemd )
 "
 RESTRICT="!test? ( test )"
 BDEPEND="
 	>=dev-util/meson-0.59
 	virtual/pkgconfig
 	${PYTHON_DEPS}
 	$(python_gen_any_dep 'dev-python/docutils[${PYTHON_USEDEP}]')
 	doc? (
 		app-doc/doxygen
 		media-gfx/graphviz
 	)
 "
 RDEPEND="
 	acct-group/audio
 	media-libs/alsa-lib
 	sys-apps/dbus[${MULTILIB_USEDEP}]
 	sys-libs/readline:=
 	sys-libs/ncurses:=[unicode(+)]
 	virtual/libintl[${MULTILIB_USEDEP}]
 	bluetooth? (
 		media-libs/fdk-aac
 		media-libs/libldac
 		media-libs/libfreeaptx
 		media-libs/sbc
 		>=net-wireless/bluez-4.101:=
 		virtual/libusb:1
 	)
 	echo-cancel? ( media-libs/webrtc-audio-processing:0 )
 	extra? (
 		>=media-libs/libsndfile-1.0.20
 	)
 	gstreamer? (
 		>=dev-libs/glib-2.32.0:2
 		>=media-libs/gstreamer-1.10.0:1.0
 		media-libs/gst-plugins-base:1.0
 	)
 	jack-client? ( >=media-sound/jack2-1.9.10:2[dbus] )
 	jack-sdk? (
 		!media-sound/jack-audio-connection-kit
 		!media-sound/jack2
 	)
 	lv2? ( media-libs/lilv )
 	pipewire-alsa? (
 		>=media-libs/alsa-lib-1.1.7[${MULTILIB_USEDEP}]
 	)
 	!pipewire-alsa? ( media-plugins/alsa-plugins[${MULTILIB_USEDEP},pulseaudio] )
 	ssl? ( dev-libs/openssl:= )
 	systemd? ( sys-apps/systemd )
 	system-service? (
 		acct-user/pipewire
 		acct-group/pipewire
 	)
 	udev? ( virtual/libudev[${MULTILIB_USEDEP}] )
 	v4l? ( media-libs/libv4l )
 	X? (
 		media-libs/libcanberra
 		x11-libs/libX11
 		x11-libs/libXfixes
 	)
 	zeroconf? ( net-dns/avahi )
 "
 DEPEND="${RDEPEND}"
 # TODO: Consider use cases where pipewire is not used for driving audio
 # Doing so with WirePlumber currently involves editing Lua scripts
 PDEPEND=">=media-video/wireplumber-0.4.8-r3"
 # Present RDEPEND that are currently always disabled due to the PW
 # code using them being required to be disabled by Gentoo guidelines
 # (i.e. developer binaries not meant for users) and unready code
 #	media-video/ffmpeg:=
 #	media-libs/libsdl2
 #	>=media-libs/vulkan-loader-1.1.69
 #
 # Ditto for DEPEND
 #	>=dev-util/vulkan-headers-1.1.69
 DOCS=( {README,INSTALL}.md NEWS )
 PATCHES=(
 	"${FILESDIR}"/${PN}-0.3.25-enable-failed-mlock-warning.patch
 )
 # limitsdfile related code taken from =sys-auth/realtime-base-0.1
 # with changes as necessary.
 limitsdfile=40-${PN}.conf
 python_check_deps() {
 	python_has_version "dev-python/docutils[${PYTHON_USEDEP}]"
 }
 src_prepare() {
 	default
 	einfo "Generating ${limitsdfile}"
 	cat > ${limitsdfile} <<- EOF || die
 		# Start of ${limitsdfile} from ${P}
 		@audio	-	memlock 256
 		$(use system-service && {
 			echo @pipewire - rtprio 95
 			echo @pipewire - nice -19
 			echo @pipewire - memlock 4194304
 		})
 		# End of ${limitsdfile} from ${P}
 	EOF
 }
 multilib_src_configure() {
 	# https://bugs.gentoo.org/838301
 	filter-flags -fno-semantic-interposition
 	local emesonargs=(
 		-Ddocdir="${EPREFIX}"/usr/share/doc/${PF}
 		$(meson_native_use_feature zeroconf avahi)
 		$(meson_native_use_feature doc docs)
 		$(meson_native_enabled examples) # TODO: Figure out if this is still important now that media-session gone
 		$(meson_native_enabled man)
 		$(meson_feature test tests)
 		-Dinstalled_tests=disabled # Matches upstream; Gentoo never installs tests
 		$(meson_native_use_feature gstreamer)
 		$(meson_native_use_feature gstreamer gstreamer-device-provider)
 		$(meson_native_use_feature systemd)
 		$(meson_native_use_feature system-service systemd-system-service)
 		-Dsystemd-system-unit-dir="$(systemd_get_systemunitdir)"
 		-Dsystemd-user-unit-dir="$(systemd_get_userunitdir)"
 		$(meson_native_use_feature systemd systemd-user-service)
 		$(meson_feature pipewire-alsa) # Allows integrating ALSA apps into PW graph
 		-Dspa-plugins=enabled
 		-Dalsa=enabled # Allows using kernel ALSA for sound I/O (NOTE: media-session is gone so IUSE=alsa/spa_alsa/alsa-backend might be possible)
 		-Daudiomixer=enabled # Matches upstream
 		-Daudioconvert=enabled # Matches upstream
 		$(meson_native_use_feature bluetooth bluez5)
 		$(meson_native_use_feature bluetooth bluez5-backend-hsp-native)
 		$(meson_native_use_feature bluetooth bluez5-backend-hfp-native)
 		$(meson_native_use_feature bluetooth bluez5-backend-ofono)
 		$(meson_native_use_feature bluetooth bluez5-backend-hsphfpd)
 		$(meson_native_use_feature bluetooth bluez5-codec-aac)
 		$(meson_native_use_feature bluetooth bluez5-codec-aptx)
 		$(meson_native_use_feature bluetooth bluez5-codec-ldac)
 		$(meson_native_use_feature bluetooth libusb) # At least for now only used by bluez5 native (quirk detection of adapters)
 		$(meson_native_use_feature echo-cancel echo-cancel-webrtc) #807889
 		-Dcontrol=enabled # Matches upstream
 		-Daudiotestsrc=enabled # Matches upstream
 		-Dffmpeg=disabled # Disabled by upstream and no major developments to spa/plugins/ffmpeg/ since May 2020
 		-Dpipewire-jack=enabled # Allows integrating JACK apps into PW graph
 		$(meson_native_use_feature jack-client jack) # Allows PW to act as a JACK client
 		$(meson_use jack-sdk jack-devel)
 		$(usex jack-sdk "-Dlibjack-path=${EPREFIX}/usr/$(get_libdir)" '')
 		-Dsupport=enabled # Miscellaneous/common plugins, such as null sink
 		-Devl=disabled # Matches upstream
 		-Dtest=disabled # fakesink and fakesource plugins
 		$(meson_native_use_feature lv2)
 		$(meson_native_use_feature v4l v4l2)
 		-Dlibcamera=disabled # libcamera is not in Portage tree
 		$(meson_native_use_feature ssl raop)
 		-Dvideoconvert=enabled # Matches upstream
 		-Dvideotestsrc=enabled # Matches upstream
 		-Dvolume=enabled # Matches upstream
 		-Dvulkan=disabled # Uses pre-compiled Vulkan compute shader to provide a CGI video source (dev thing; disabled by upstream)
 		$(meson_native_use_feature extra pw-cat)
 		$(meson_feature udev)
 		-Dudevrulesdir="${EPREFIX}$(get_udevdir)/rules.d"
 		-Dsdl2=disabled # Controls SDL2 dependent code (currently only examples when -Dinstalled_tests=enabled which we never install)
 		$(meson_native_use_feature extra sndfile) # Enables libsndfile dependent code (currently only pw-cat)
 		-Dsession-managers="[]" # All available session managers are now their own projects, so there's nothing to build
 		# Just for bell sounds in X11 right now.
 		$(meson_native_use_feature X x11)
 		$(meson_native_use_feature X x11-xfixes)
 		$(meson_native_use_feature X libcanberra)
 	)
 	meson_src_configure
 }
 multilib_src_install() {
 	# Our custom DOCS do not exist in multilib source directory
 	DOCS= meson_src_install
 }
 multilib_src_install_all() {
 	einstalldocs
 	insinto /etc/security/limits.d
 	doins ${limitsdfile}
 	if use pipewire-alsa; then
 		dodir /etc/alsa/conf.d
 		# Install pipewire conf loader hook
 		insinto /usr/share/alsa/alsa.conf.d
 		doins "${FILESDIR}"/99-pipewire-default-hook.conf
 		eprefixify "${ED}"/usr/share/alsa/alsa.conf.d/99-pipewire-default-hook.conf
 		# These will break if someone has /etc that is a symbolic link to a subfolder! See #724222
 		# And the current dosym8 -r implementation is likely affected by the same issue, too.
 		dosym ../../../usr/share/alsa/alsa.conf.d/50-pipewire.conf /etc/alsa/conf.d/50-pipewire.conf
 		dosym ../../../usr/share/alsa/alsa.conf.d/99-pipewire-default-hook.conf /etc/alsa/conf.d/99-pipewire-default-hook.conf
 	fi
 	if ! use systemd; then
 		insinto /etc/xdg/autostart
 		newins "${FILESDIR}"/pipewire.desktop-r1 pipewire.desktop
 		exeinto /usr/bin
 		newexe "${FILESDIR}"/gentoo-pipewire-launcher.in gentoo-pipewire-launcher
 		eprefixify "${ED}"/usr/bin/gentoo-pipewire-launcher
 	fi
 }
 pkg_postinst() {
 	use udev && udev_reload
 	elog "It is recommended to raise RLIMIT_MEMLOCK to 256 for users"
 	elog "using PipeWire. Do it either manually or add yourself"
 	elog "to the 'audio' group:"
 	elog
 	elog "  usermod -aG audio <youruser>"
 	elog
 	if ! use jack-sdk; then
 		elog "JACK emulation is incomplete and not all programs will work. PipeWire's"
 		elog "alternative libraries have been installed to a non-default location."
 		elog "To use them, put pw-jack <application> before every JACK application."
 		elog "When using pw-jack, do not run jackd/jackdbus. However, a virtual/jack"
 		elog "provider is still needed to compile the JACK applications themselves."
 		elog
 	fi
 	if use systemd; then
 		elog "When switching from PulseAudio, you may need to disable PulseAudio:"
 		elog
 		elog "  systemctl --user disable pulseaudio.service pulseaudio.socket"
 		elog
 		elog "To use PipeWire, the user units must be manually enabled"
 		elog "by running this command as each user you use for desktop activities:"
 		elog
 		elog "  systemctl --user enable pipewire.socket pipewire-pulse.socket"
 		elog
 		elog "A reboot is recommended to avoid interferences from still running"
 		elog "PulseAudio daemon."
 		elog
 		elog "Both new users and those upgrading need to enable WirePlumber"
 		elog "for relevant users:"
 		elog
 		elog "  systemctl --user disable pipewire-media-session.service"
 		elog "  systemctl --user --force enable wireplumber.service"
 		elog
 		elog "Root user may replace --user with --global to change system default"
 		elog "configuration for all of the above commands."
 	else
 		ewarn "PipeWire daemon startup has been moved to a launcher script!"
 		ewarn "Make sure that ${EROOT}/etc/pipewire/pipewire.conf either does not exist or no"
 		ewarn "longer is set to start a session manager or PulseAudio compatibility daemon (all"
 		ewarn "lines similar to '{ path = /usr/bin/pipewire*' should be commented out)"
 		ewarn
 		ewarn "Those manually starting /usr/bin/pipewire via .xinitrc or similar _must_ from"
 		ewarn "now on start ${EROOT}/usr/bin/gentoo-pipewire-launcher instead! It is highly"
 		ewarn "advised that a D-Bus user session is set up before starting the script."
 		ewarn
 		if has_version 'media-sound/pulseaudio[daemon]' || has_version 'media-sound/pulseaudio-daemon'; then
 			elog "This ebuild auto-enables PulseAudio replacement. Because of that, users"
 			elog "are recommended to edit pulseaudio client configuration files:"
 			elog "${EROOT}/etc/pulse/client.conf and ${EROOT}/etc/pulse/client.conf.d/enable-autospawn.conf"
 			elog "if it exists, and disable autospawning of the original daemon by setting:"
 			elog
 			elog "  autospawn = no"
 			elog
 			elog "Please note that the semicolon (;) must _NOT_ be at the beginning of the line!"
 			elog
 			elog "Alternatively, if replacing PulseAudio daemon is not desired, edit"
 			elog "${EROOT}/usr/bin/gentoo-pipewire-launcher by commenting out the relevant"
 			elog "command:"
 			elog
 			elog "#${EROOT}/usr/bin/pipewire -c pipewire-pulse.conf &"
 			elog
 		fi
 		elog "NOTE:"
 		elog "Starting with PipeWire-0.3.30, this package is no longer installing its config"
 		elog "into ${EROOT}/etc/pipewire by default. In case you need to change"
 		elog "its config, please start by copying default config from ${EROOT}/usr/share/pipewire"
 		elog "and just override the sections you want to change."
 	fi
 	elog
 	elog "For latest tips and tricks, troubleshooting information and documentation"
 	elog "in general, please refer to https://wiki.gentoo.org/wiki/PipeWire"
 	elog
 	optfeature_header "The following can be installed for optional runtime features:"
 	optfeature "restricted realtime capabilities via D-Bus" sys-auth/rtkit
 	if has_version 'net-misc/ofono' ; then
 		ewarn "Native backend has become default. Please disable oFono via:"
 		if systemd_is_booted ; then
 			ewarn "systemctl disable ofono"
 		else
 			ewarn "rc-update delete ofono"
 		fi
 		ewarn
 	fi
 	if use system-service; then
 		ewarn
 		ewarn "WARNING: you have enabled the system-service USE flag, which installs"
 		ewarn "the system-wide systemd units that enable PipeWire to run as a system"
 		ewarn "service. This is more than likely NOT what you want. You are strongly"
 		ewarn "advised not to enable this mode and instead stick with systemd user"
 		ewarn "units. The default configuration files will likely not work out of"
 		ewarn "box, and you are on your own with configuration."
 		ewarn
 	fi
 }
--- a/media-video/wireplumber/Manifest
+++ b/media-video/wireplumber/Manifest
@ -1 +0,0 @@
 DIST wireplumber-0.4.10.tar.gz 395588 BLAKE2B 6df1af17d1e53ab1449a2f6f9af5a0c4f7b1cd981e07556e5ea3c6b4d5d624e66b97ce4f945f7ccccebbf72b75d35d10990fac11b5228275f27e5320885ff1ec SHA512 342e8bba2cf00faab71ef39bb361b5ada66ff3a68ccf7a756ea1ca402da6e94784eece277ca02992bc7573c51cb8b1bad33aa9c593b3d1bfe0bb0286e2f4506f
--- a/media-video/wireplumber/files/wireplumber-0.4.10-alsa.lua-fix-device-name-deduplication-when-reserva.patch
+++ b/media-video/wireplumber/files/wireplumber-0.4.10-alsa.lua-fix-device-name-deduplication-when-reserva.patch
@ -1,117 +0,0 @@
 https://gitlab.freedesktop.org/pipewire/wireplumber/-/commit/c00c5a6675b6640db13111c808eaa3251917c412
 From c00c5a6675b6640db13111c808eaa3251917c412 Mon Sep 17 00:00:00 2001
 From: Julian Bouzas <julian.bouzas@collabora.com>
 Date: Wed, 18 May 2022 10:51:41 -0400
 Subject: [PATCH] alsa.lua: fix device name deduplication when reservation is
 enabled
 Fixes #241
 ---
 src/scripts/monitors/alsa.lua | 47 +++++++++++++++++++----------------
 1 file changed, 25 insertions(+), 22 deletions(-)
 diff --git a/src/scripts/monitors/alsa.lua b/src/scripts/monitors/alsa.lua
 index 01d241db..7beed3a8 100644
 --- a/src/scripts/monitors/alsa.lua
 +++ b/src/scripts/monitors/alsa.lua
@@ -11,6 +11,10 @@ local config = ... or {}
 -- ensure config.properties is not nil
 config.properties = config.properties or {}
 +-- unique device/node name tables
 +device_names_table = nil
 +node_names_table = nil
 +
 -- preprocess rules and create Interest objects
 for _, r in ipairs(config.rules or {}) do
   r.interests = {}
@@ -41,16 +45,6 @@ function rulesApplyProperties(properties)
   end
 end
 -function findDuplicate(parent, id, property, value)
 -  for i = 0, id - 1, 1 do
 -    local obj = parent:get_managed_object(i)
 -    if obj and obj.properties[property] == value then
 -      return true
 -    end
 -  end
 -  return false
 -end
 -
 function nonempty(str)
   return str ~= "" and str or nil
 end
@@ -125,11 +119,11 @@ function createNode(parent, id, type, factory, properties)
     -- deduplicate nodes with the same name
     for counter = 2, 99, 1 do
 -      if findDuplicate(parent, id, "node.name", properties["node.name"]) then
 -        properties["node.name"] = name .. "." .. counter
 -      else
 +      if node_names_table[properties["node.name"]] ~= true then
 +        node_names_table[properties["node.name"]] = true
         break
       end
 +      properties["node.name"] = name .. "." .. counter
     end
   end
@@ -186,6 +180,10 @@ function createDevice(parent, id, factory, properties)
   local device = SpaDevice(factory, properties)
   if device then
     device:connect("create-object", createNode)
 +    device:connect("object-removed", function (parent, id)
 +      local node = parent:get_managed_object(id)
 +      node_names_table[node.properties["node.name"]] = nil
 +    end)
     device:activate(Feature.SpaDevice.ENABLED | Feature.Proxy.BOUND)
     parent:store_managed_object(id, device)
   else
@@ -205,11 +203,11 @@ function prepareDevice(parent, id, type, factory, properties)
   -- deduplicate devices with the same name
   for counter = 2, 99, 1 do
 -    if findDuplicate(parent, id, "device.name", properties["device.name"]) then
 -      properties["device.name"] = name .. "." .. counter
 -    else
 +    if device_names_table[properties["device.name"]] ~= true then
 +      device_names_table[properties["device.name"]] = true
       break
     end
 +    properties["device.name"] = name .. "." .. counter
   end
   -- ensure the device has a description
@@ -337,16 +335,21 @@ function createMonitor ()
   -- handle create-object to prepare device
   m:connect("create-object", prepareDevice)
 -  -- if dbus reservation, handle object-removed to destroy device reservations
 -  if rd_plugin then
 -    m:connect("object-removed", function (parent, id)
 -      local device = parent:get_managed_object(id)
 +  -- handle object-removed to destroy device reservations and recycle device name
 +  m:connect("object-removed", function (parent, id)
 +    local device = parent:get_managed_object(id)
 +    if rd_plugin then
       local rd_name = device.properties["api.dbus.ReserveDevice1"]
       if rd_name then
         rd_plugin:call("destroy-reservation", rd_name)
       end
 -    end)
 -  end
 +    end
 +    device_names_table[device.properties["device.name"]] = nil
 +  end)
 +
 +  -- reset the name tables to make sure names are recycled
 +  device_names_table = {}
 +  node_names_table = {}
   -- activate monitor
   Log.info("Activating ALSA monitor")
 -- 
 GitLab
--- a/media-video/wireplumber/files/wireplumber-0.4.10-config-disable-sound-server-parts.patch
+++ b/media-video/wireplumber/files/wireplumber-0.4.10-config-disable-sound-server-parts.patch
@ -1,26 +0,0 @@
 commit 3d86f51d2c43fd76be2450a8c27836fdd8619cfa
 Author: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
 Date:   Sun May 15 18:19:03 2022 +0300
    config: Disable alsa and bluez monitors by default
 diff --git a/src/config/bluetooth.lua.d/50-bluez-config.lua b/src/config/bluetooth.lua.d/50-bluez-config.lua
 index d5727d3..938eae0 100644
 --- a/src/config/bluetooth.lua.d/50-bluez-config.lua
 +++ b/src/config/bluetooth.lua.d/50-bluez-config.lua
@@ -1,4 +1,4 @@
 -bluez_monitor.enabled = true
 +bluez_monitor.enabled = false
 bluez_monitor.properties = {
   -- These features do not work on all headsets, so they are enabled
 diff --git a/src/config/main.lua.d/50-alsa-config.lua b/src/config/main.lua.d/50-alsa-config.lua
 index 3468333..d4c065b 100644
 --- a/src/config/main.lua.d/50-alsa-config.lua
 +++ b/src/config/main.lua.d/50-alsa-config.lua
@@ -1,4 +1,4 @@
 -alsa_monitor.enabled = true
 +alsa_monitor.enabled = false
 alsa_monitor.properties = {
   -- Create a JACK device. This is not enabled by default because
--- a/media-video/wireplumber/files/wireplumber-0.4.10-config-fix-enabled-property-to-default-to-true-when.patch
+++ b/media-video/wireplumber/files/wireplumber-0.4.10-config-fix-enabled-property-to-default-to-true-when.patch
@ -1,129 +0,0 @@
 https://gitlab.freedesktop.org/pipewire/wireplumber/-/commit/1f045309208ab5d927883b5adc2b7d1623fae162
 From 1f045309208ab5d927883b5adc2b7d1623fae162 Mon Sep 17 00:00:00 2001
 From: George Kiagiadakis <george.kiagiadakis@collabora.com>
 Date: Thu, 12 May 2022 12:19:38 +0300
 Subject: [PATCH] config: fix enabled property to default to "true" when not
 defined
 Fixes backwards compatibility with older config files
 Fixes: #254
 ---
 src/config/bluetooth.lua.d/30-bluez-monitor.lua | 2 +-
 src/config/main.lua.d/20-default-access.lua     | 2 +-
 src/config/main.lua.d/30-alsa-monitor.lua       | 2 +-
 src/config/main.lua.d/30-libcamera-monitor.lua  | 2 +-
 src/config/main.lua.d/30-v4l2-monitor.lua       | 2 +-
 src/config/main.lua.d/40-device-defaults.lua    | 2 +-
 src/config/main.lua.d/40-stream-defaults.lua    | 2 +-
 src/config/policy.lua.d/10-default-policy.lua   | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)
 diff --git a/src/config/bluetooth.lua.d/30-bluez-monitor.lua b/src/config/bluetooth.lua.d/30-bluez-monitor.lua
 index b40026c2..a870aa5d 100644
 --- a/src/config/bluetooth.lua.d/30-bluez-monitor.lua
 +++ b/src/config/bluetooth.lua.d/30-bluez-monitor.lua
@@ -3,7 +3,7 @@ bluez_monitor.properties = {}
 bluez_monitor.rules = {}
 function bluez_monitor.enable()
 -  if not bluez_monitor.enabled then
 +  if bluez_monitor.enabled == false then
     return
   end
 diff --git a/src/config/main.lua.d/20-default-access.lua b/src/config/main.lua.d/20-default-access.lua
 index a6ffb2ee..0a7eb955 100644
 --- a/src/config/main.lua.d/20-default-access.lua
 +++ b/src/config/main.lua.d/20-default-access.lua
@@ -3,7 +3,7 @@ default_access.properties = {}
 default_access.rules = {}
 function default_access.enable()
 -  if not default_access.enabled then
 +  if default_access.enabled == false then
     return
   end
 diff --git a/src/config/main.lua.d/30-alsa-monitor.lua b/src/config/main.lua.d/30-alsa-monitor.lua
 index da0b2c70..8e45e434 100644
 --- a/src/config/main.lua.d/30-alsa-monitor.lua
 +++ b/src/config/main.lua.d/30-alsa-monitor.lua
@@ -3,7 +3,7 @@ alsa_monitor.properties = {}
 alsa_monitor.rules = {}
 function alsa_monitor.enable()
 -  if not alsa_monitor.enabled then
 +  if alsa_monitor.enabled == false then
     return
   end
 diff --git a/src/config/main.lua.d/30-libcamera-monitor.lua b/src/config/main.lua.d/30-libcamera-monitor.lua
 index 4a8257ff..cd820a83 100644
 --- a/src/config/main.lua.d/30-libcamera-monitor.lua
 +++ b/src/config/main.lua.d/30-libcamera-monitor.lua
@@ -3,7 +3,7 @@ libcamera_monitor.properties = {}
 libcamera_monitor.rules = {}
 function libcamera_monitor.enable()
 -  if not libcamera_monitor.enabled then
 +  if libcamera_monitor.enabled == false then
     return
   end
 diff --git a/src/config/main.lua.d/30-v4l2-monitor.lua b/src/config/main.lua.d/30-v4l2-monitor.lua
 index 7cfd4bcd..3fbdc9e7 100644
 --- a/src/config/main.lua.d/30-v4l2-monitor.lua
 +++ b/src/config/main.lua.d/30-v4l2-monitor.lua
@@ -3,7 +3,7 @@ v4l2_monitor.properties = {}
 v4l2_monitor.rules = {}
 function v4l2_monitor.enable()
 -  if not v4l2_monitor.enabled then
 +  if v4l2_monitor.enabled == false then
     return
   end
 diff --git a/src/config/main.lua.d/40-device-defaults.lua b/src/config/main.lua.d/40-device-defaults.lua
 index 55aafe85..2204c4ac 100644
 --- a/src/config/main.lua.d/40-device-defaults.lua
 +++ b/src/config/main.lua.d/40-device-defaults.lua
@@ -38,7 +38,7 @@ device_defaults.persistent_profiles = {
 }
 function device_defaults.enable()
 -  if not device_defaults.enabled then
 +  if device_defaults.enabled == false then
     return
   end
 diff --git a/src/config/main.lua.d/40-stream-defaults.lua b/src/config/main.lua.d/40-stream-defaults.lua
 index 2975f4f6..307d83df 100644
 --- a/src/config/main.lua.d/40-stream-defaults.lua
 +++ b/src/config/main.lua.d/40-stream-defaults.lua
@@ -25,7 +25,7 @@ stream_defaults.rules = {
 }
 function stream_defaults.enable()
 -  if not stream_defaults.enabled then
 +  if stream_defaults.enabled == false then
     return
   end
 diff --git a/src/config/policy.lua.d/10-default-policy.lua b/src/config/policy.lua.d/10-default-policy.lua
 index 7b00e94e..edfdeb1c 100644
 --- a/src/config/policy.lua.d/10-default-policy.lua
 +++ b/src/config/policy.lua.d/10-default-policy.lua
@@ -38,7 +38,7 @@ bluetooth_policy.policy = {
 }
 function default_policy.enable()
 -  if not default_policy.enabled then
 +  if default_policy.enabled == false then
     return
   end
 -- 
 GitLab
--- a/media-video/wireplumber/files/wireplumber-0.4.10-m-default-nodes-don-t-check-if-all-device-nodes-are.patch
+++ b/media-video/wireplumber/files/wireplumber-0.4.10-m-default-nodes-don-t-check-if-all-device-nodes-are.patch
@ -1,187 +0,0 @@
 https://gitlab.freedesktop.org/pipewire/wireplumber/-/commit/392cce2136e81ac3146078eacbbae85b694c917a
 From 392cce2136e81ac3146078eacbbae85b694c917a Mon Sep 17 00:00:00 2001
 From: Julian Bouzas <julian.bouzas@collabora.com>
 Date: Fri, 20 May 2022 07:38:24 -0400
 Subject: [PATCH] m-default-nodes: don't check if all device nodes are ready
 when finding default node
 This check was originally added to avoid a small audio glitch when changing
 default nodes while also changing the device profile (eg Gnome Sound Settings).
 The check is removed because it causes issues when disabling alsa nodes. There
 are plans to fix the audio glitch issue in the future with the planned
 event-dispatcher architecture.
 Fixes #279
 ---
 modules/module-default-nodes.c | 136 ---------------------------------
 1 file changed, 136 deletions(-)
 diff --git a/modules/module-default-nodes.c b/modules/module-default-nodes.c
 index 0fdaed5..577f9bb 100644
 --- a/modules/module-default-nodes.c
 +++ b/modules/module-default-nodes.c
@@ -345,135 +345,6 @@ reevaluate_default_node (WpDefaultNodes * self, WpMetadata *m, gint node_t)
   }
 }
 -static guint
 -get_device_total_nodes (WpPipewireObject * proxy)
 -{
 -  g_autoptr (WpIterator) profiles = NULL;
 -  g_auto (GValue) item = G_VALUE_INIT;
 -
 -  profiles = wp_pipewire_object_enum_params_sync (proxy, "Profile", NULL);
 -  if (!profiles)
 -    return 0;
 -
 -  for (; wp_iterator_next (profiles, &item); g_value_unset (&item)) {
 -    WpSpaPod *pod = g_value_get_boxed (&item);
 -    gint idx = -1;
 -    const gchar *name = NULL;
 -    g_autoptr (WpSpaPod) classes = NULL;
 -
 -    /* Parse */
 -    if (!wp_spa_pod_get_object (pod, NULL,
 -        "index", "i", &idx,
 -        "name", "s", &name,
 -        "classes", "?P", &classes,
 -        NULL))
 -      continue;
 -    if (!classes)
 -      continue;
 -
 -    /* Parse profile classes */
 -    {
 -      g_autoptr (WpIterator) it = wp_spa_pod_new_iterator (classes);
 -      g_auto (GValue) v = G_VALUE_INIT;
 -      gint total_nodes = 0;
 -      for (; wp_iterator_next (it, &v); g_value_unset (&v)) {
 -        WpSpaPod *entry = g_value_get_boxed (&v);
 -        g_autoptr (WpSpaPodParser) pp = NULL;
 -        const gchar *media_class = NULL;
 -        gint n_nodes = 0;
 -        g_return_val_if_fail (entry, 0);
 -        if (!wp_spa_pod_is_struct (entry))
 -          continue;
 -        pp = wp_spa_pod_parser_new_struct (entry);
 -        g_return_val_if_fail (pp, 0);
 -        g_return_val_if_fail (wp_spa_pod_parser_get_string (pp, &media_class), 0);
 -        g_return_val_if_fail (wp_spa_pod_parser_get_int (pp, &n_nodes), 0);
 -        wp_spa_pod_parser_end (pp);
 -
 -        total_nodes += n_nodes;
 -      }
 -
 -      if (total_nodes > 0)
 -        return total_nodes;
 -    }
 -  }
 -
 -  return 0;
 -}
 -
 -static gboolean
 -nodes_ready (WpDefaultNodes * self)
 -{
 -  g_autoptr (WpIterator) it = NULL;
 -  g_auto (GValue) val = G_VALUE_INIT;
 -
 -  /* Get the total number of nodes for each device and make sure they exist
 -   * and have at least 1 port */
 -  it = wp_object_manager_new_filtered_iterator (self->rescan_om,
 -      WP_TYPE_DEVICE, NULL);
 -  for (; wp_iterator_next (it, &val); g_value_unset (&val)) {
 -    WpPipewireObject *device = g_value_get_object (&val);
 -    guint total_nodes = get_device_total_nodes (device);
 -    if (total_nodes > 0) {
 -      guint32 device_id = wp_proxy_get_bound_id (WP_PROXY (device));
 -      g_autoptr (WpIterator) node_it = NULL;
 -      g_auto (GValue) node_val = G_VALUE_INIT;
 -      guint ready_nodes = 0;
 -
 -      node_it = wp_object_manager_new_filtered_iterator (self->rescan_om,
 -          WP_TYPE_NODE, WP_CONSTRAINT_TYPE_PW_PROPERTY,
 -          PW_KEY_DEVICE_ID, "=i", device_id, NULL);
 -      for (; wp_iterator_next (node_it, &node_val); g_value_unset (&node_val)) {
 -        WpPipewireObject *node = g_value_get_object (&node_val);
 -        g_autoptr (WpPort) port =
 -              wp_object_manager_lookup (self->rescan_om,
 -              WP_TYPE_PORT, WP_CONSTRAINT_TYPE_PW_PROPERTY,
 -              PW_KEY_NODE_ID, "=u", wp_proxy_get_bound_id (WP_PROXY (node)),
 -              NULL);
 -        if (port)
 -          ready_nodes++;
 -      }
 -
 -      if (ready_nodes < total_nodes) {
 -        const gchar *device_name = wp_pipewire_object_get_property (
 -            WP_PIPEWIRE_OBJECT (device), PW_KEY_DEVICE_NAME);
 -        wp_debug_object (self, "device '%s' is not ready (%d/%d)", device_name,
 -            ready_nodes, total_nodes);
 -        return FALSE;
 -      }
 -    }
 -  }
 -
 -  /* Make sure Audio and Video virtual sources have ports */
 -  {
 -    g_autoptr (WpIterator) node_it = NULL;
 -    g_auto (GValue) node_val = G_VALUE_INIT;
 -    node_it = wp_object_manager_new_filtered_iterator (self->rescan_om,
 -        WP_TYPE_NODE, WP_CONSTRAINT_TYPE_PW_PROPERTY, PW_KEY_DEVICE_ID, "-",
 -        NULL);
 -    for (; wp_iterator_next (node_it, &node_val); g_value_unset (&node_val)) {
 -      WpPipewireObject *node = g_value_get_object (&node_val);
 -      const gchar *media_class = wp_pipewire_object_get_property (
 -          WP_PIPEWIRE_OBJECT (node), PW_KEY_MEDIA_CLASS);
 -      g_autoptr (WpPort) port =
 -          wp_object_manager_lookup (self->rescan_om,
 -          WP_TYPE_PORT, WP_CONSTRAINT_TYPE_PW_PROPERTY,
 -          PW_KEY_NODE_ID, "=u", wp_proxy_get_bound_id (WP_PROXY (node)),
 -          NULL);
 -      if (!port &&
 -          (g_strcmp0 ("Audio/Source/Virtual", media_class) == 0 ||
 -           g_strcmp0 ("Video/Source/Virtual", media_class) == 0)) {
 -        const gchar *node_name = wp_pipewire_object_get_property (
 -            WP_PIPEWIRE_OBJECT (node), PW_KEY_NODE_NAME);
 -        wp_debug_object (self, "virtual node '%s' is not ready", node_name);
 -        return FALSE;
 -      }
 -    }
 -  }
 -
 -  return TRUE;
 -}
 -
 static void
 sync_rescan (WpCore * core, GAsyncResult * res, WpDefaultNodes * self)
 {
@@ -491,10 +362,6 @@ sync_rescan (WpCore * core, GAsyncResult * res, WpDefaultNodes * self)
   if (!metadata)
     return;
 -  /* Make sure nodes are ready for current profile */
 -  if (!nodes_ready (self))
 -    return;
 -
   wp_trace_object (self, "re-evaluating defaults");
   reevaluate_default_node (self, metadata, AUDIO_SINK);
   reevaluate_default_node (self, metadata, AUDIO_SOURCE);
@@ -584,13 +451,10 @@ on_metadata_added (WpObjectManager *om, WpMetadata *metadata, gpointer d)
   self->rescan_om = wp_object_manager_new ();
   wp_object_manager_add_interest (self->rescan_om, WP_TYPE_DEVICE, NULL);
   wp_object_manager_add_interest (self->rescan_om, WP_TYPE_NODE, NULL);
 -  wp_object_manager_add_interest (self->rescan_om, WP_TYPE_PORT, NULL);
   wp_object_manager_request_object_features (self->rescan_om, WP_TYPE_DEVICE,
       WP_OBJECT_FEATURES_ALL);
   wp_object_manager_request_object_features (self->rescan_om, WP_TYPE_NODE,
       WP_OBJECT_FEATURES_ALL);
 -  wp_object_manager_request_object_features (self->rescan_om, WP_TYPE_PORT,
 -      WP_OBJECT_FEATURES_ALL);
   g_signal_connect_object (self->rescan_om, "objects-changed",
       G_CALLBACK (schedule_rescan), self, G_CONNECT_SWAPPED);
   g_signal_connect_object (self->rescan_om, "object-added",
 -- 
 2.35.1
--- a/media-video/wireplumber/files/wireplumber-0.4.10-m-lua-scripting-allow-converting-GValue-holding-NUL.patch
+++ b/media-video/wireplumber/files/wireplumber-0.4.10-m-lua-scripting-allow-converting-GValue-holding-NUL.patch
@ -1,36 +0,0 @@
 https://gitlab.freedesktop.org/pipewire/wireplumber/-/commit/c2f31bb550755acba31da2e9f5bbdf646ed5e805
 From c2f31bb550755acba31da2e9f5bbdf646ed5e805 Mon Sep 17 00:00:00 2001
 From: Julian Bouzas <julian.bouzas@collabora.com>
 Date: Mon, 16 May 2022 15:41:10 -0400
 Subject: [PATCH] m-lua-scripting: allow converting GValue holding NULL objects
 to Lua
 ---
 modules/module-lua-scripting/wplua/value.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
 diff --git a/modules/module-lua-scripting/wplua/value.c b/modules/module-lua-scripting/wplua/value.c
 index 133051a4..e31ae4ac 100644
 --- a/modules/module-lua-scripting/wplua/value.c
 +++ b/modules/module-lua-scripting/wplua/value.c
@@ -314,9 +314,14 @@ wplua_gvalue_to_lua (lua_State *L, const GValue *v)
       wplua_pushboxed (L, G_VALUE_TYPE (v), g_value_dup_boxed (v));
     break;
   case G_TYPE_OBJECT:
 -  case G_TYPE_INTERFACE:
 -    wplua_pushobject (L, g_value_dup_object (v));
 +  case G_TYPE_INTERFACE: {
 +    GObject *object = g_value_dup_object (v);
 +    if (object)
 +      wplua_pushobject (L, g_value_dup_object (v));
 +    else
 +      lua_pushnil (L);
     break;
 +  }
   case G_TYPE_ENUM:
     wplua_enum_to_lua (L, g_value_get_enum (v), G_VALUE_TYPE (v));
     break;
 -- 
 GitLab
--- a/media-video/wireplumber/files/wireplumber-0.4.10-m-lua-scripting-fix-object-refcounting.patch
+++ b/media-video/wireplumber/files/wireplumber-0.4.10-m-lua-scripting-fix-object-refcounting.patch
@ -1,32 +0,0 @@
 https://gitlab.freedesktop.org/pipewire/wireplumber/-/commit/7908b8d7be2a2992c57cd549054eda7ce46e4b44
 From 13b85bd4a25ab374f5e5e90b7288e6987996856e Mon Sep 17 00:00:00 2001
 From: Michael Olbrich <m.olbrich@pengutronix.de>
 Date: Tue, 24 May 2022 11:35:15 +0200
 Subject: [PATCH] m-lua-scripting: fix object refcounting
 7908b8d7be2a2992c57cd549054eda7ce46e4b44 ("m-lua-scripting: allow
 converting GValue holding NULL objects to Lua") accidentally added a second
 refcount. As a result, the objects are never freeded.
 Remove the second refcount to fix this.
 ---
 modules/module-lua-scripting/wplua/value.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 diff --git a/modules/module-lua-scripting/wplua/value.c b/modules/module-lua-scripting/wplua/value.c
 index e31ae4a..a7927dc 100644
 --- a/modules/module-lua-scripting/wplua/value.c
 +++ b/modules/module-lua-scripting/wplua/value.c
@@ -317,7 +317,7 @@ wplua_gvalue_to_lua (lua_State *L, const GValue *v)
   case G_TYPE_INTERFACE: {
     GObject *object = g_value_dup_object (v);
     if (object)
 -      wplua_pushobject (L, g_value_dup_object (v));
 +      wplua_pushobject (L, object);
     else
       lua_pushnil (L);
     break;
 -- 
 2.35.1
--- a/media-video/wireplumber/files/wireplumber-0.4.11-alsa-lua-crash.patch
+++ b/media-video/wireplumber/files/wireplumber-0.4.11-alsa-lua-crash.patch
@ -1,33 +0,0 @@
 https://gitlab.freedesktop.org/pipewire/wireplumber/-/commit/c16e637c329bc9dda8544b18f5bd47a8d63ee253
 From c16e637c329bc9dda8544b18f5bd47a8d63ee253 Mon Sep 17 00:00:00 2001
 From: George Kiagiadakis <george.kiagiadakis@collabora.com>
 Date: Thu, 7 Jul 2022 20:58:36 +0300
 Subject: [PATCH] alsa: use "obj_type" as a variable name to avoid shadowing
 lua's "type" function
 This causes a crash when running in a VM because the code tries to
 execute lua's "type()" and ends up executing the local string variable...
 Fixes: #303
 --- a/src/scripts/monitors/alsa.lua
 +++ b/src/scripts/monitors/alsa.lua
@@ -49,7 +49,7 @@ function nonempty(str)
   return str ~= "" and str or nil
 end
 -function createNode(parent, id, type, factory, properties)
 +function createNode(parent, id, obj_type, factory, properties)
   local dev_props = parent.properties
   -- set the device id and spa factory name; REQUIRED, do not change
@@ -199,7 +199,7 @@ function createDevice(parent, id, factory, properties)
   end
 end
 -function prepareDevice(parent, id, type, factory, properties)
 +function prepareDevice(parent, id, obj_type, factory, properties)
   -- ensure the device has an appropriate name
   local name = "alsa_card." ..
     (properties["device.name"] or
 GitLab
--- a/media-video/wireplumber/files/wireplumber-0.4.11-dbus-reconnect-crash.patch
+++ b/media-video/wireplumber/files/wireplumber-0.4.11-dbus-reconnect-crash.patch
@ -1,45 +0,0 @@
 https://gitlab.freedesktop.org/pipewire/wireplumber/-/commit/eb406bdb2cbbcd49c55c71285f8f2eddb624d24b
 From eb406bdb2cbbcd49c55c71285f8f2eddb624d24b Mon Sep 17 00:00:00 2001
 From: George Kiagiadakis <george.kiagiadakis@collabora.com>
 Date: Wed, 13 Jul 2022 13:38:14 +0300
 Subject: [PATCH] dbus: fix crash when trying to reconnect
 When coming from on_sync_reconnect, data points to the WpDBus object
 instead of the activation transition.
 Fixes: #305
 --- a/lib/wp/dbus.c
 +++ b/lib/wp/dbus.c
@@ -58,14 +58,26 @@ wp_dbus_set_state (WpDbus *self, WpDBusState new_state)
 static void
 on_got_bus (GObject * obj, GAsyncResult * res, gpointer data)
 {
 -  WpTransition *transition = WP_TRANSITION (data);
 -  WpDbus *self = wp_transition_get_source_object (transition);
 +  WpTransition *transition;
 +  WpDbus *self;
   g_autoptr (GError) error = NULL;
 +  if (WP_IS_TRANSITION (data)) {
 +    // coming from wp_dbus_enable
 +    transition = WP_TRANSITION (data);
 +    self = wp_transition_get_source_object (transition);
 +  } else {
 +    // coming from on_sync_reconnect
 +    transition = NULL;
 +    self = WP_DBUS (data);
 +  }
 +
   self->connection = g_dbus_connection_new_for_address_finish (res, &error);
   if (!self->connection) {
 -    g_prefix_error (&error, "Failed to connect to bus: ");
 -    wp_transition_return_error (transition, g_steal_pointer (&error));
 +    if (transition) {
 +      g_prefix_error (&error, "Failed to connect to bus: ");
 +      wp_transition_return_error (transition, g_steal_pointer (&error));
 +    }
     return;
   }
 GitLab
--- a/media-video/wireplumber/files/wireplumber-0.4.11-loop.patch
+++ b/media-video/wireplumber/files/wireplumber-0.4.11-loop.patch
@ -1,147 +0,0 @@
 https://bugs.gentoo.org/866551
 https://gitlab.freedesktop.org/pipewire/wireplumber/-/commit/37c839b9308cd3d6580bf01077db8cb29ec2aa2f
 https://gitlab.freedesktop.org/pipewire/wireplumber/-/commit/370b692933634675213110048fcda6dff52eb52b
 From: Pauli Virtanen <pav@iki.fi>
 Date: Tue, 19 Jul 2022 20:39:06 +0300
 Subject: [PATCH] policy-node: fix potential rescan loop
 SiLink activation might be delayed indefinitely under some error
 conditions. Currently, policy-node schedules a rescan when it sees a
 non-activated link on a stream to be moved, which produces busy loop if
 the si-link doesn't activate.
 Instead of rescheduling on non-active si-links, just remove and emit a
 warning. The si-link then gets removed once it gets activated.
 Reproducer:
 1. Play audio from Rhythmbox and pause.
 2. Switch default output with pactl between two different outputs
 3. Links from the paused stream stay at "init"
 --- a/src/scripts/policy-node.lua
 +++ b/src/scripts/policy-node.lua
@@ -694,16 +694,15 @@ function handleLinkable (si)
     local link = lookupLink (si_id, si_flags[si_id].peer_id)
     if reconnect then
       if link ~= nil then
 -        -- remove old link if active, otherwise schedule rescan
 -        if ((link:get_active_features() & Feature.SessionItem.ACTIVE) ~= 0) then
 -          si_flags[si_id].peer_id = nil
 -          link:remove ()
 -          Log.info (si, "... moving to new target")
 -        else
 -          scheduleRescan()
 -          Log.info (si, "... scheduled rescan")
 -          return
 +        -- remove old link
 +        if ((link:get_active_features() & Feature.SessionItem.ACTIVE) == 0) then
 +          -- remove also not yet activated links: they might never become active,
 +          -- and we should not loop waiting for them
 +          Log.warning (link, "Link was not activated before removing")
         end
 +        si_flags[si_id].peer_id = nil
 +        link:remove ()
 +        Log.info (si, "... moving to new target")
       end
     else
       if link ~= nil then
 GitLab
 From: Pauli Virtanen <pav@iki.fi>
 Date: Tue, 19 Jul 2022 20:01:10 +0300
 Subject: [PATCH] m-si-link: don't wait for establish before activation +
 cleanup links
 SiLink should not wait for WpLinks becoming ESTABLISHED, before
 activation. That flag shows whether a link has moved away from the
 "init" state, however, links to e.g. Pulseaudio corked streams can stay
 in "init" state until uncorking.  This causes trouble for policies,
 which needlessly wait for such links to establish.
 The WpLink objects may also be kept alive by other referents, and
 just unrefing them does not necessarily destroy the PW objects.
 Activate SiLink even if the WpLink is still in "init" state. It's enough
 that the link otherwise successfully establishes.
 At dispose time, explicitly request destroying the WpLinks that were
 created by the SiLink, to ensure they are removed even if there's
 something else referring to them.
 --- a/modules/module-si-standard-link.c
 +++ b/modules/module-si-standard-link.c
@@ -132,6 +132,27 @@ si_standard_link_get_associated_proxy (WpSessionItem * item, GType proxy_type)
   return NULL;
 }
 +static void
 +request_destroy_link (gpointer data, gpointer user_data)
 +{
 +  WpLink *link = WP_LINK (data);
 +
 +  wp_global_proxy_request_destroy (WP_GLOBAL_PROXY (link));
 +}
 +
 +static void
 +clear_node_links (GPtrArray **node_links_p)
 +{
 +  /*
 +   * Something else (eg. object managers) may be keeping the WpLink
 +   * objects alive. Deactive the links now, to destroy the PW objects.
 +   */
 +  if (*node_links_p)
 +    g_ptr_array_foreach (*node_links_p, request_destroy_link, NULL);
 +
 +  g_clear_pointer (node_links_p, g_ptr_array_unref);
 +}
 +
 static void
 si_standard_link_disable_active (WpSessionItem *si)
 {
@@ -154,7 +175,8 @@ si_standard_link_disable_active (WpSessionItem *si)
           WP_SI_LINKABLE (si_in));
   }
 -  g_clear_pointer (&self->node_links, g_ptr_array_unref);
 +  clear_node_links (&self->node_links);
 +
   self->n_active_links = 0;
   self->n_failed_links = 0;
   self->n_async_ops_wait = 0;
@@ -168,7 +190,7 @@ on_link_activated (WpObject * proxy, GAsyncResult * res,
     WpTransition * transition)
 {
   WpSiStandardLink *self = wp_transition_get_source_object (transition);
 -  guint len = self->node_links->len;
 +  guint len = self->node_links ? self->node_links->len : 0;
   /* Count the number of failed and active links */
   if (wp_object_activate_finish (proxy, res, NULL))
@@ -182,7 +204,7 @@ on_link_activated (WpObject * proxy, GAsyncResult * res,
   /* We only active feature if all links activated successfully */
   if (self->n_failed_links > 0) {
 -    g_clear_pointer (&self->node_links, g_ptr_array_unref);
 +    clear_node_links (&self->node_links);
     wp_transition_return_error (transition, g_error_new (
         WP_DOMAIN_LIBRARY, WP_LIBRARY_ERROR_OPERATION_FAILED,
         "%d of %d PipeWire links failed to activate",
@@ -251,7 +273,7 @@ create_links (WpSiStandardLink * self, WpTransition * transition,
   /* Clear old links if any */
   self->n_active_links = 0;
   self->n_failed_links = 0;
 -  g_clear_pointer (&self->node_links, g_ptr_array_unref);
 +  clear_node_links (&self->node_links);
   /* tuple format:
       uint32 node_id;
@@ -327,7 +349,7 @@ create_links (WpSiStandardLink * self, WpTransition * transition,
     /* activate to ensure it is created without errors */
     wp_object_activate_closure (WP_OBJECT (link),
 -        WP_OBJECT_FEATURES_ALL, NULL,
 +        WP_OBJECT_FEATURES_ALL & ~WP_LINK_FEATURE_ESTABLISHED, NULL,
         g_cclosure_new_object (
             (GCallback) on_link_activated, G_OBJECT (transition)));
   }
 GitLab
--- a/media-video/wireplumber/metadata.xml
+++ b/media-video/wireplumber/metadata.xml
@ -1,16 +0,0 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
 <pkgmetadata>
 	<maintainer type="person">
 		<email>sam@gentoo.org</email>
 		<name>Sam James</name>
 	</maintainer>
 	<upstream>
 		<bugs-to>https://gitlab.freedesktop.org/pipewire/wireplumber/-/issues</bugs-to>
 		<changelog>https://gitlab.freedesktop.org/pipewire/wireplumber/-/releases</changelog>
 		<!--doc>https://gitlab.freedesktop.org/pipewire/wireplumber/-/wikis/home</doc-->
 	</upstream>
 	<use>
 		<flag name="system-service">Install systemd unit files for running as a system service. Not recommended.</flag>
 	</use>
 </pkgmetadata>
--- a/media-video/wireplumber/wireplumber-0.4.10-r4.ebuild
+++ b/media-video/wireplumber/wireplumber-0.4.10-r4.ebuild
@ -1,125 +0,0 @@
 # Copyright 1999-2022 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 EAPI=8
 LUA_COMPAT=( lua5-{3,4} )
 inherit lua-single meson systemd
 if [[ ${PV} == 9999 ]]; then
 	EGIT_REPO_URI="https://gitlab.freedesktop.org/pipewire/${PN}.git"
 	EGIT_BRANCH="master"
 	inherit git-r3
 else
 	SRC_URI="https://gitlab.freedesktop.org/pipewire/${PN}/-/archive/${PV}/${P}.tar.gz"
 	KEYWORDS="amd64 arm arm64 ~loong ppc ppc64 ~riscv ~sparc x86"
 fi
 DESCRIPTION="Replacement for pipewire-media-session"
 HOMEPAGE="https://gitlab.freedesktop.org/pipewire/wireplumber"
 LICENSE="MIT"
 SLOT="0/0.4"
 IUSE="elogind system-service systemd test"
 REQUIRED_USE="
 	${LUA_REQUIRED_USE}
 	?? ( elogind systemd )
 	system-service? ( systemd )
 "
 RESTRICT="!test? ( test )"
 # introspection? ( dev-libs/gobject-introspection ) is valid but likely only used for doc building
 BDEPEND="
 	dev-libs/glib
 	dev-util/gdbus-codegen
 	dev-util/glib-utils
 	sys-devel/gettext
 "
 DEPEND="
 	${LUA_DEPS}
 	>=dev-libs/glib-2.62
 	>=media-video/pipewire-0.3.48:=
 	virtual/libintl
 	elogind? ( sys-auth/elogind )
 	systemd? ( sys-apps/systemd )
 "
 # Any dev-lua/* deps get declared like this inside RDEPEND:
 #	$(lua_gen_cond_dep '
 #		dev-lua/<NAME>[${LUA_USEDEP}]
 #	')
 RDEPEND="${DEPEND}
 	system-service? (
 		acct-user/pipewire
 		acct-group/pipewire
 	)
 "
 DOCS=( {NEWS,README}.rst )
 PATCHES=(
 	"${FILESDIR}"/${P}-config-fix-enabled-property-to-default-to-true-when.patch
 	"${FILESDIR}"/${P}-m-lua-scripting-allow-converting-GValue-holding-NUL.patch
 	"${FILESDIR}"/${P}-alsa.lua-fix-device-name-deduplication-when-reserva.patch
 	"${FILESDIR}"/${P}-m-default-nodes-don-t-check-if-all-device-nodes-are.patch
 	"${FILESDIR}"/${P}-m-lua-scripting-fix-object-refcounting.patch
 )
 src_configure() {
 	local emesonargs=(
 		-Ddoc=disabled # Ebuild not wired up yet (Sphinx, Doxygen?)
 		-Dintrospection=disabled # Only used for Sphinx doc generation
 		-Dsystem-lua=true # We always unbundle everything we can
 		-Dsystem-lua-version=$(ver_cut 1-2 $(lua_get_version))
 		$(meson_feature elogind)
 		$(meson_feature systemd)
 		$(meson_use system-service systemd-system-service)
 		$(meson_use systemd systemd-user-service)
 		-Dsystemd-system-unit-dir=$(systemd_get_systemunitdir)
 		-Dsystemd-user-unit-dir=$(systemd_get_userunitdir)
 		$(meson_use test tests)
 	)
 	meson_src_configure
 }
 src_install() {
 	meson_src_install
 	# We copy the default config, so that Gentoo tools can pick up on any
 	# updates and /etc does not end up with stale overrides.
 	# If a reflinking CoW filesystem is used (e.g. Btrfs), then the files
 	# will not actually get stored twice until modified.
 	insinto /etc
 	doins -r "${ED}"/usr/share/wireplumber
 }
 pkg_postinst() {
 	if systemd_is_booted ; then
 		ewarn "pipewire-media-session.service is no longer installed. You must switch"
 		ewarn "to wireplumber.service user unit before your next logout/reboot:"
 		ewarn "systemctl --user disable pipewire-media-session.service"
 		ewarn "systemctl --user --force enable wireplumber.service"
 	else
 		ewarn "Switch to WirePlumber will happen the next time gentoo-pipewire-launcher"
 		ewarn "is started (a replacement for directly calling pipewire binary)."
 		ewarn
 		ewarn "Please ensure that ${EROOT}/etc/pipewire/pipewire.conf either does not exist"
 		ewarn "or, if it does exist, that any reference to"
 		ewarn "${EROOT}/usr/bin/pipewire-media-session is commented out (begins with a #)."
 	fi
 	if use system-service; then
 		ewarn
 		ewarn "WARNING: you have enabled the system-service USE flag, which installs"
 		ewarn "the system-wide systemd units that enable WirePlumber to run as a system"
 		ewarn "service. This is more than likely NOT what you want. You are strongly"
 		ewarn "advised not to enable this mode and instead stick with systemd user"
 		ewarn "units. The default configuration files will likely not work out of"
 		ewarn "box, and you are on your own with configuration."
 		ewarn
 	fi
 }
		`@ -1 +0,0 @@`
			`DIST pipewire-0.3.51.tar.gz 1789070 BLAKE2B 8538eb9f2178efa26365f30b324b707826e580caa1fd9c09b62c561c140c14186e0d2b04808fa78eb5642ddccf1a347def19934ecd654be06b215a693075b6fc SHA512 a762fd260b4b14ad9ef142be11ab1c22268da6726e2179559ffb254f0ce7daf7a502779e33c64313a9c6a9fc1bd15150b76be04ec81aa27c35dbb4333cecdb4a`
		`@ -1 +0,0 @@`
			`DIST wireplumber-0.4.10.tar.gz 395588 BLAKE2B 6df1af17d1e53ab1449a2f6f9af5a0c4f7b1cd981e07556e5ea3c6b4d5d624e66b97ce4f945f7ccccebbf72b75d35d10990fac11b5228275f27e5320885ff1ec SHA512 342e8bba2cf00faab71ef39bb361b5ada66ff3a68ccf7a756ea1ca402da6e94784eece277ca02992bc7573c51cb8b1bad33aa9c593b3d1bfe0bb0286e2f4506f`